View MBRM560-13-F_727245.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPICE MODEL: MBRM560
MBRM560
5A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
POWERMITEa3
Features
* * * * *
Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency Low Reverse Current For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead Free Finish, RoHS Compliant Version (Note 2)
A P
3
E G
POWERMITEa3 Dim A B Min 4.03 6.40 Max 4.09 6.61
B
J
H
C D E G H
.889 NOM 1.83 NOM 1.10 5.01 4.37 .71 .36 1.73 1.14 5.17 4.43 .77 .46 1.83 .178 NOM
Mechanical Data
* * * * * * * *
Case: POWERMITEa3 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish). Polarity: See Diagram Marking: See Page 3 Weight: 0.072 grams (approximate) Note:
1
2
M
D C
PIN 1 PIN 2
K C L
PIN 3, BOTTOMSIDE HEAT SINK
J K L M P
.178 NOM
e3
Pins 1 & 2 must be electrically connected at the printed circuit board.
All Dimensions in mm
Maximum Ratings
@ TA = 25C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also Figure 5) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load @ TC = 90C Typical Thermal Resistance Junction to Soldering Point Operating Temperature Range Storage Temperature Range Symbol VRRM VRWM VR VR(RMS) IO IFSM RqJS Tj TSTG @ TA = 25C unless otherwise specified Symbol V(BR)R VF Min 60 3/4 3/4 3/4 3/4 3/4 3/4 Typ 3/4 0.65 0.56 0.74 0.64 2 0.6 Max 3/4 0.69 0.60 0.78 0.68 200 20 Unit V V mA mA Test Condition IR = 0.2mA IF = 5A, TJ = 25C IF = 5A, TJ = 125C IF = 8A, TJ = 25C IF = 8A, TJ = 125C TJ = 25C, VR = 60V TJ = 100C, VR = 60V Value 60 42 5 100 2.7 -55 to +125 -55 to +150 Unit V V A A C/W C C
Electrical Characteristics
Characteristic Reverse Breakdown Voltage (Note 1) Forward Voltage
Reverse Current (Note 1)
Notes:
IR
1. Short duration test pulse used to minimize self-heating effect. 2. RoHS revision 13.2.2003. High Temperature Solder Exemption Applied, see EU Directive Annex Note 7.
DS30299 Rev. 5 - 2
1 of 4 www.diodes.com
MBRM560
a Diodes Incorporated
IF, INSTANTANEOUS FORWARD CURRENT (A)
100
10,000
Tj = 125C
1000
10
Tj = 125C
Tj = 100C
100
1.0
Tj = 100C Tj = 25C
Tj = 75C
10
0.1
1.0
Tj = 25C
0.01 0 0.2 0.4 0.6 0.8 VF, INSTANTANEOUS F0RWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics
0.1 0 10
20
30
40
50
60
VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics
IFSM, PEAK FORWARD SURGE CURRENT (A)
100
1000
80
60
CT, TOTAL CAPACITANCE (pF)
Single Half-Sine-Wave TC = 90C
f = 1MHz
100
40
20
0 1 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Peak Forward Surge Current
10 0 15 30 45 60 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Capacitance vs. Reverse Voltage
DS30299 Rev. 5 - 2
2 of 4 www.diodes.com
MBRM560
PF(AV), AVERAGE FORWARD POWER DISSIPATION (W)
7.5
3.5 3.0 2.5 2.0 1.5 Note 5 1.0 0.5 0 0
Note 4
IF, DC FORWARD CURRENT (A)
6.0 Note 3 4.5 Note 4 3.0
1.5 Note 5 0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (C) Fig. 5 DC Forward Current Derating
7 4 1 2 5 3 6 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 6 Forward Power Dissipation
Notes:
3. TA = TSOLDERING POINT, RqJS = 2.7C/W, RqSA = 0C/W. 4. Device mounted on GETEK substrate, 2"x2", 2 oz. copper, double-sided, cathode pad dimensions 0.75" x 1.0", anode pad dimensions 0.25" x 1.0". RqJA in range of 20-40C/W. 5. Device mounted on FR-4 substrate, 2"x2", 2 oz. copper, single-sided, pad layout as per Diodes Inc. suggested pad layout document AP02001 which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. R qJA in range of 100-130C/W.
Ordering Information
Device MBRM560-13-F
Notes: 6.
(Note 6) Packaging POWERMITEa3 Shipping 5000/Tape & Reel
For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
MBRM560 YYWW(K)
MBRM560 = Product type marking code = Manufacturers' code marking YYWW = Date code marking YY = Last digit of year ex: 02 for 2002 WW = Week code 01 to 52 (K) = Factory Designer Code
POWERMITE is a registered trademark of Microsemi Corporation.
DS30299 Rev. 5 - 2
3 of 4 www.diodes.com
MBRM560
IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.
DS30299 Rev. 5 - 2
4 of 4 www.diodes.com
MBRM560

▲Up To Search▲

Price & Availability of MBRM560-13-F

	To Download MBRM560-13-F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .